Suppressing the environmental dependence of the open‐circuit voltage in inverted polymer solar cells through a radical polymer anodic modifier

Developing stable, readily‐synthesized, and solution‐processable transparent conducting polymers for interfacial modifying layers in organic photovoltaic (OPV) devices has become of great importance. Here, the radical polymer, poly(2,2,6,6‐tetramethylpiperidinyloxy methacrylate (PTMA), is shown to not affect the absorption of the well‐studied poly(3‐hexylthiophene) (P3HT) and [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PCBM) active layer when incorporated into inverted OPV devices, as it is highly transparent in the visible spectrum due to the non‐conjugated nature of the PTMA backbone. The inclusion of this radical polymer as an anode‐modifying layer enhanced the open‐circuit voltage and short‐circuit current density values over devices that did not contain an anodic modifier. Importantly, devices fabricated with the PTMA interlayer had performance metrics that were time‐independent over the entire course of multiples days of testing after exposing the OPV devices to ambient conditions. Furthermore, these high performance values were independent of the metal used as the top electrode contact in the inverted OPV devices. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 311–316     

Optical properties of amorphous HF–In–Zn–O thin films estimated from transmission spectra

Amorphous and flat (<1 nm roughness) Hf–In–Zn–O thin films were prepared by radio frequency (rf) magnetron sputtering method at room temperature (RT) and at 300 °C substrate temperature. The crystal structure and surface morphology were investigated by high resolution X-ray diffraction (HR-XRD) and atomic force microscopy (AFM), respectively. Optical properties of these films were obtained from the UV–VIS–NIR transmission spectra, at normal incidence, over the 200–2000 nm spectral range. Swanepoel's method was used to calculate the thickness and the refractive index of the films. The dispersion of refractive index was obtained in terms of the single-oscillator Wemple–DiDomenico model. The optical absorption edge was described using the direct transition model proposed by Tauc. The film deposited at higher substrate temperature had lower optical band gap, higher refractive index, higher oscillator strength and energy of the effective dispersion oscillator. Optical characterization shows that films become more stable, relaxed and rigid at higher substrate temperature.     

Diffusions of multiplicative cascades

A multiplicative cascade can be thought of as a randomization of a measure on the boundary of a tree, constructed from an iid collection of random variables attached to the tree vertices. Given an initial measure with certain regularity properties, we construct a continuous time, measure-valued process whose value at each time is a cascade of the initial one. We do this by replacing the random variables on the vertices with independent increment processes satisfying certain moment assumptions. Our process has a Markov property: at any given time it is a cascade of the process at any earlier time by random variables that are independent of the past. It has the further advantage of being a martingale and, under certain extra conditions, it is also continuous. For Gaussian independent increment processes we develop the infinite-dimensional stochastic calculus that describes the evolution of the measure process, and use it to compute the optimal Hölder exponent in the Wasserstein distance on measures. We also discuss applications of this process to the model of tree polymers.     

Crystal Structure and Third-Order Nonlinear Optical Properties Study of Tetraphenylporphyrin and Its Nickle Complex at Wavelength 532 nm and 1064 nm

Tetraphenylporphyrin (TPP) and its nickel(II) (NiTPP) complex have been synthesized, their crystal structures have been determined by means of X-ray single crystal diffraction. The TPP possesses good planarity in the porphyrin core, while in the complex the planarity disappeared. The central nickel(II) ion coordinates with four nitrogen atoms, which constructed a distorted square environment. Their third-order nonlinear optical properties have been studied using Z-scan technique at wavelength 532 nm and 1064 nm in picosecond (ps) domain. At 532 nm nonlinear absorption were observed, TPP shows two-photon absorption (TPA) combined with saturable absorption (SA), while NiTPP shows SA. At 1064 nm nonlinear refraction were observed, the molecular second hyperpolarizability γ of the NiTPP was about 1.4 times larger than that of the TPP.     

Fabrication,Characterization and Optical Properties of TiO2 Nanotube Arrays on Boron-doped Diamond Film Through Liquid Phase Deposition

TiO2 nanotube（TiNT） arrays were deposited on boron-doped diamond films by a liquid-phase deposition method with ZnO nanorod arrays as the template.The different morphologies of TiNTs have been obtained by controlling the morphology of ZnO template.The X-ray diffraction and energy-dispersive X-ray analysis show that the ZnO nanorod array template has been removed in the TiNTs formation process.The crystalline quality of the TiNTs is improved by increasing the annealing temperature.The band gap of the TiNTs is about 3.25 eV estimated by the UV-Vis absorption spectroscopy,which is close to the value of bulk TiO2.In the photoluminescence spectrum,a broad visible emission in a range of ca.550-750 nm appears due to the surface oxygen vacancies and defects.     

Screening of N,N‐bidentate and N,N,N‐tridentate pyridine‐based ligands in the catalytic allylic oxidation of cyclic olefins

A variety of chiral N,N‐bidentate and N,N,N‐tridentate ligands based on the pyridine framework, namely C2‐symmetric dipyridylmethane and terpyridine, N‐(p‐toluensulfinyl)iminopyridines and two kinds of iminopyridines, has been assessed in the asymmetric copper(I)‐catalysed allylic oxidation of cyclic olefins. Catalytic activity and enantioselectivity were found to be highly dependent upon the framework of the ligands, which afforded cycloalkenyl benzoates in low to moderate yields and enantioselectivities. The best yields (up to 70%) and enantioselectivities (up to 53% enantiomeric excess) were obtained with an iminopyridine based on camphane and quinoline skeletons. Copyright © 2014 John Wiley & Sons, Ltd.     

Tribology of thin wetting films between bubble and moving solid surface

This work shows a successful example of coupling of theory and experiment to study the tribology of bubble rubbing on solid surface. Such kind of investigation is reported for the first time in the literature. A theory about wetting film intercalated between bubble and moving solid surface was developed, thus deriving the non-linear evolution differential equation which accounted for the friction slip coefficient at the solid surface. The stationary 3D film thickness profile, which appears to be a solution of the differential equation, for each particular speed of motion of the solid surface was derived by means of special procedure and unique interferometric experimental setup. This allowed us to determine the 3D map of the lift pressure within the wetting film, the friction force per unit area and the friction coefficient of rubbing at different speeds of motion of the solid surface. Thus, we observed interesting tribological details about the rubbing of the bubble on the solid surface like for example:     

A simple,mild, and efficient method for the preparation of α,α-dichloroketones with DCDMH catalyzed by ammonium chloride

New process that can selectively prepare α,α-dichloro ketones from various ketones with 1,3-dichloro-5,5-dimethylhydantoin (DCDMH) using ammonium chloride as a catalyst is reported. The effects of ammonium salts, solvents, DCDMH, and reaction temperature were investigated. Under the optimal condition, most of α,α-dichlorinated products were selectively obtained in 86–98% yield.     

Formation of polyketone particle structure by hexafluoroisopropanol solvent evaporation and effects of plasticizer addition

Few solvents are capable of dissolving polyketones (PKs). 1,1,1,3,3,3‐Hexafluoro‐2‐propanol (hexafluoroisopropanol, HFIP) is a better solvent than trifluoroethanol and m‐cresol. When HFIP was evaporated from a PK/HFIP solution, a porous cast‐film with a microparticle structure was formed because the isotactic PKs adopted a helical conformation, and convection during evaporation of the high polarity and low‐boiling‐point HFIP caused aggregation and rolling of the polymer molecules. The addition of plasticizer suppressed particle formation, improving the surface structure and mechanical properties of the film. In particular, the dielectric properties of the film improved significantly. This will enable PKs, which are rigid insulating materials, to be used as dielectric materials, broadening their range of applications. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 887–892